K3F6
Offline · Showing Saved Content

3F6 — Dan E Richards Municipal Airport

Dan E Richards Municipal Airport

Non-ToweredPaducah, TX • ICAO: K3F6 • 1,860' MSL

3F6 WeatherLive METAR & TAF

Wind Component

3F6 Runways1 runway

3F6 has 1 runway. The longest is 17/35 at 3,186 ft × 50 ft (asphalt).

17/35Lighted3,186 ft × 50 ftAsphalt

FAA NASR data, cycle 2026-09-03

3F6 Field Data

3F6 field elevation is 1,860 ft MSL. The standard traffic pattern altitude at 3F6 is 2,860 ft MSL (1,000 ft AGL).

Field elevation1,860 ft MSL
Pattern altitude2,860 ft MSL1,000 ft AGL · standard
Control towerNon-towered

FAA NASR data, cycle 2026-09-03

3F6 Frequencies

CTAF 122.9 MHz — 3F6 is non-towered; self-announce position and intentions on CTAF.

CTAF122.9
CNTR133.5

Fly to K3F6

Check K3F6 against your personal minimums, plan a route to it, and see the best runway for the current wind — free.

Frequently Asked About 3F6

Is 3F6 (Dan E Richards Municipal Airport) a towered airport?

No, 3F6 is a non-towered airport. The CTAF frequency is 122.9 MHz.

How long is the runway at 3F6?

3F6 has 1 runway (17/35). The longest runway is 3,186 feet.

What is the traffic pattern altitude at 3F6?

3F6 uses the standard traffic pattern altitude of 1,000 feet AGL — about 2,860 feet MSL at a field elevation of 1,860 feet.

What is the elevation of 3F6?

3F6 (Dan E Richards Municipal Airport) has a field elevation of 1,860 feet MSL.

Where is 3F6 located?

3F6 (Dan E Richards Municipal Airport) is located in Paducah, TX.