BTY
Offline · Showing Saved Content

BTY VORTAC · Beatty

Beatty, Nevada · 114.70 MHz

The Beatty VORTAC (BTY) transmits on 114.70 MHz, TACAN/DME channel 94X, from 2,927 ft MSL in Beatty, Nevada. From the FAA’s NASR data (cycle 2026-09-03); check the current Chart Supplement and NOTAMs before you rely on it.

Station

Frequency114.70 MHz
TACAN/DME Channel94X
TypeVORTAC
StatusRestrictedSee FAA Remarks
Elevation2,927 ft MSL
Magnetic Variation16°E1965 Epoch
Hours24 Hours
ARTCCLos Angeles

Service Volume: VOR High (VH)

Where the FAA protects this VOR’s signal off published routes (AIM 1-1-8). Heights are above the transmitter, not MSL. Published routes and procedures can use a VOR beyond these limits, and the remarks below can narrow them.

1,000 ft to 5,000 ft ATH40 NM
5,000 ft to 14,500 ft ATH70 NM
14,500 ft to 60,000 ft ATH100 NM
18,000 ft to 45,000 ft ATH130 NM

FAA Remarks

  • VOR UNUSBL 000-060 BYD 12 NM; 142-090 BYD 40 NM; 195-210 BYD 33 NM BLW 10500 FT; 265-305 BYD 30 NM BLW 10200 FT; 305-325 BYD 28 NM BLW 9000 FT; 325-089 BYD 9 NM.
  • TACAN AZM UNUSBL 000-060 BYD 12 NM; 195-210 BYD 33 NM BLW 10500 FT; 265-305 BYD 30 NM BLW 10200 FT; 305-325 BYD 28 NM BLW 9000 FT; 325-089 BYD 9 NM.
  • DME UNUSBL 000-060 BYD 12 NM; 195-210 BYD 33 NM BLW 10500 FT; 265-305 BYD 30 NM BLW 10200 FT; 305-325 BYD 28 NM BLW 9000 FT; 325-089 BYD 9 NM.

Verbatim from NASR. Radials are magnetic, from the station. UNUSBL = Unusable · BYD = Beyond · BLW = Below · AZM = Azimuth.

Public Airports Within 40 NM

Each field’s radial and distance from BTY, using the station’s own 16°E alignment.

KBTY Beatty AirportBeattyR-317 · 4.1 NML06 Furnace Creek AirportDeath ValleyR-182 · 21 NML09 Stovepipe Wells AirportDeath ValleyR-223 · 23 NM

Nearby VORs

TPH TonopahVORTAC · 116.00 · R-334 · 75 NMBIH BishopVOR/DME · 113.35 · R-279 · 85 NMOAL CoaldaleVORTAC · 117.70 · R-310 · 87 NMLAS Las VegasVORTAC · 116.90 · R-103 · 88 NMBLD Boulder CityVORTAC · 116.70 · R-101 · 103 NMDAG DaggettVORTAC · 113.20 · R-160 · 111 NM

More VORs in Nevada, or plan a route through BTY in the Route Planner.