OCS
Offline · Showing Saved Content

OCS VOR/DME · Rock Springs

Rock Springs, Wyoming · 116.00 MHz

The Rock Springs VOR/DME (OCS) transmits on 116.00 MHz, TACAN/DME channel 107X, from 6,785 ft MSL in Rock Springs, Wyoming. From the FAA’s NASR data (cycle 2026-09-03); check the current Chart Supplement and NOTAMs before you rely on it.

Station

Frequency116.00 MHz
TACAN/DME Channel107X
TypeVOR/DME
StatusRestrictedSee FAA Remarks
Elevation6,785 ft MSL
Magnetic Variation13°E1995 Epoch
Hours24 Hours
ARTCCSalt Lake City

Service Volume: VOR High (VH)

Where the FAA protects this VOR’s signal off published routes (AIM 1-1-8). Heights are above the transmitter, not MSL. Published routes and procedures can use a VOR beyond these limits, and the remarks below can narrow them.

1,000 ft to 5,000 ft ATH40 NM
5,000 ft to 14,500 ft ATH70 NM
14,500 ft to 60,000 ft ATH100 NM
18,000 ft to 45,000 ft ATH130 NM

FAA Remarks

  • VOR UNUSBL 000-007 BYD 40 NM; 008-018 BYD 40 NM BLW 12000 FT; 008-018 BYD 62 NM; 035-045 BYD 40 NM BLW 9500 FT; 035-045 BYD 46 NM BLW 11200 FT; 035-045 BYD 71 NM BLW 18000 FT; 046-060 BYD 40 NM; 066-076 BYD 40 NM BLW 18000 FT; 078-087 BYD 40 NM; 088-098 BYD 40 NM BLW 21000 FT; 099-110 BYD 40 NM BLW 18000 FT; 111-121 BYD 40 NM BLW 12000 FT; 111-121 BYD 56 NM; 122-134 BYD 40 NM BLW 18000 FT; 135-145 BYD 40 NM; 186-195 BYD 25 NM BLW 14000 FT; 250-258 BYD 40 NM BLW 18000 FT; 259-267 BYD 40 NM BLW 15000 FT; 259-267 BYD 85 NM; 268-277 BYD 40 NM BLW 11000 FT; 268-277 BYD 55 NM BLW 16000 FT;
  • DME UNUSBL 122-127 BYD 25 NM BLW 12000 FT.
  • VOR UNUSBL 268-277 BYD 85 NM.

Verbatim from NASR. Radials are magnetic, from the station. UNUSBL = Unusable · BYD = Beyond · BLW = Below.

VOR Receiver Checkpoints

For the 30-day VOR check under 14 CFR 91.171: within 4° at a ground checkpoint, 6° at an airborne one.

Ground · R-270RKS2.3 NM INTXN TWYS B AND E.

Public Airports Within 40 NM

Each field’s radial and distance from OCS, using the station’s own 13°E alignment.

Nearby VORs

More VORs in Wyoming, or plan a route through OCS in the Route Planner.